SMC EZ Connect Wireless Adapter Guide de l'utilisateur télécharger pdf (Page 41)

Configuration

To use the WPA function, take the following steps:

1. Select Security Type, WPA-PSK/WPA2-PSK from the

drop-down menu.

2. Type in the WPA Passphrase (Pre-Shared Key: PSK).

3. Select ASCII or Hex in the Key Type field

4. Click Apply Change to allow the settings to take effect.

Note: The WPA Passphrase character limit needs to be between

8-63 characters.

Manual Pre-Shared Key supports up to 64-Hex characters. If

there is no authentication server on your SOHO network, you can

issue the Pre-Shared Key to the adapter that is connected to the

access point. Be sure to use the same key for the wireless access

point and the connected adapter.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

SMC EZ Connect Wireless Adapter Guide de l'utilisateur Page 41