SMC EliteConnect Wireless Bridge Guide de l'utilisateur télécharger pdf (Page 167)

System Management Commands

7-19

ip https port

Use this command to specify the UDP port number used for HTTPS/SSL connection

to the access point’s Web interface. Use the no form to restore the default port.

Syntax

ip https port <port_number>

no ip https port

port_number – The UDP port used for HTTPS/SSL.

(Range: 80, 1024-65535)

Default Setting

443

Command Mode

Global Configuration

Command Usage

• You cannot configure the HTTP and HTTPS servers to use the same port.

• To avoid using common reserved TCP port numbers below 1024, the

configurable range is restricted to 443 and between 1024 and 65535.

• If you change the HTTPS port number, clients attempting to connect to the

HTTPS server must specify the port number in the URL, in this format:

https://device:port_number

Example

ip https server

Use this command to enable the secure hypertext transfer protocol (HTTPS) over

the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted

connection) to the access point’s Web interface. Use the no form to disable this

function.

SMC AP(config)#ip https port 1234

SMC AP(config)#

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 317 318

Pas de commentaire

SMC EliteConnect Wireless Bridge Guide de l'utilisateur Page 167