SMC EliteConnect Wireless Bridge Guide de l'utilisateur télécharger pdf (Page 56)

System Configuration

6-4

CLI Commands for System Identification – Enter the global configuration mode, and

use the system name command to specify a new system name. Then return to the

Exec mode, and use the show system command to display the changes to the

system identification settings.

SMC AP#config 7-8

Enter configuration commands, one per line.

SMC AP(config)#system name R&D 7-14

SMC AP(config)#end 7-90

SMC AP#show system 7-24

System Information

==============================================================

Serial Number :

System Up time : 0 days, 0 hours, 32 minutes, 22 seconds

System Name : Enterprise Wireless AP

System Location :

System Contact : Contact

System Country Code : US - UNITED STATES

MAC Address : 00-12-CF-12-34-60

Radio A MAC Address : 00-12-CF-12-34-61

Radio G MAC Address : 00-12-CF-12-34-65

IP Address : 192.168.2.2

Subnet Mask : 255.255.255.0

Default Gateway : 0.0.0.0

VLAN State : DISABLED

Management VLAN ID(AP): 1

IAPP State : ENABLED

DHCP Client : ENABLED

HTTP Server : ENABLED

HTTP Server Port : 80

HTTP Session Timeout : 300 sec(s)

HTTPS Server : ENABLED

HTTPS Server Port : 443

Slot Status : Dual band(a/g)

Boot Rom Version : v1.1.6

Software Version : v4.3.3.1b05

SSH Server : ENABLED

SSH Server Port : 22

Telnet Server : ENABLED

DHCP Relay : DISABLED

==============================================================

SMC AP#

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 317 318

Pas de commentaire

SMC EliteConnect Wireless Bridge Guide de l'utilisateur Page 56